# description
This MedicationRequest Resource represents an order for both supply of the medication and the instructions for administration of the medication to a patient with further constraints applied to support the Digital Child Health project.

# snapshot.element[].short
Ordering of medication for patient or group

# snapshot.element[].definition
An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain nested Resources

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain any narrative

# snapshot.element[].constraint[].human
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource

# snapshot.element[].definition
The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

# snapshot.element[].comment
The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
A set of rules under which this content was created

# snapshot.element[].definition
A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

# snapshot.element[].comment
Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.   This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The base language in which the resource is written.

# snapshot.element[].comment
Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource  Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Text summary of the resource, for human interpretation

# snapshot.element[].definition
A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

# snapshot.element[].comment
Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

# snapshot.element[].comment
This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
This records identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. For example a re-imbursement system might issue its own id for each prescription that is created.  This is particularly important where FHIR only provides part of an entire workflow process where records must be tracked through an entire system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].mapping[].map
ORC-2-Placer Order Number / ORC-3-Filler Order Number

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
usual | official | temp | secondary (If known)

# snapshot.element[].comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

# snapshot.element[].requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the purpose for this identifier, if known .

# snapshot.element[].definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].comment
This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

# snapshot.element[].requirements
Allows users to make use of identifiers when the identifier system is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

# snapshot.element[].requirements
There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

# snapshot.element[].example[].valueUri
http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.

# snapshot.element[].comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)

# snapshot.element[].short
Time period when id is/was valid for use

# snapshot.element[].definition
Time period during which identifier is/was valid for use.

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].mapping[].map
Role.effectiveTime or implied by context

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Organization that issued id (may be just text)

# snapshot.element[].definition
Organization that issued/manages the identifier.

# snapshot.element[].comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Protocol or definition followed by this request.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A plan or request that is fulfilled in whole or in part by this medication request.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
.outboundRelationship[typeCode=FLFS].target[classCode=SBADM or PROC or PCPR or OBS, moodCode=RQO orPLAN or PRP]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition or prescription.

# snapshot.element[].requirements
Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
usual | official | temp | secondary (If known)

# snapshot.element[].comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

# snapshot.element[].requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the purpose for this identifier, if known .

# snapshot.element[].definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].comment
This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

# snapshot.element[].requirements
Allows users to make use of identifiers when the identifier system is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

# snapshot.element[].requirements
There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

# snapshot.element[].example[].valueUri
http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.

# snapshot.element[].comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)

# snapshot.element[].short
Time period when id is/was valid for use

# snapshot.element[].definition
Time period during which identifier is/was valid for use.

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].mapping[].map
Role.effectiveTime or implied by context

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Organization that issued id (may be just text)

# snapshot.element[].definition
Organization that issued/manages the identifier.

# snapshot.element[].comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown

# snapshot.element[].definition
A code specifying the current state of the order.  Generally this will be active or completed state.

# snapshot.element[].comment
This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription

# snapshot.element[].short
proposal | plan | order | instance-order

# snapshot.element[].definition
Whether the request is a proposal, plan, or an original order.

# snapshot.element[].comment
It is expected that the type of requester will be restricted for different stages of a MedicationRequest.  For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device.  Plans can be created by Practitioners, Patients, RelatedPersons and Devices.  Original orders can be created by a Practitioner only.  An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.  This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
.moodCode (nuances beyond PRP/PLAN/RQO would need to be elsewhere)

# snapshot.element[].definition
Indicates the type of medication order and where the medication is expected to be consumed or administered.

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept identifying where the medication ordered is expected to be consumed or administered

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Indicates how quickly the Medication Request should be addressed with respect to other requests.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the level of importance to be assigned to actioning the request

# snapshot.element[].definition
Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

# snapshot.element[].comment
If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended.  For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource. .

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept identifying substance or product that can be ordered.

# snapshot.element[].mapping[].map
RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A link to a resource representing the person or set of individuals to whom the medication will be given.

# snapshot.element[].comment
The subject on a medication request is mandatory.  For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
Message/Body/NewRx/Patient  (need detail to link to specific patient … Patient.Identification in SCRIPT)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A link to an encounter, or episode of care, that identifies the particular occurrence or set occurrences of contact between patient and health care provider.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Information to support ordering of the medication

# snapshot.element[].definition
Include additional information (for example, patient height and weight) that supports the ordering of the medication.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
.outboundRelationship[typeCode=PERT].target[A_SupportingClinicalStatement CMET minimal with many different choices of classCodes(ORG, ENC, PROC, SPLY, SBADM, OBS) and each of the act class codes draws from one or more of the following moodCodes (EVN, DEF, INT PRMS, RQO, PRP, APT, ARQ, GOL)]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The date (and perhaps time) when the prescription was initially written or authored on.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
RXE-32-Original Order Date/Time / ORC-9-Date/Time of Transaction

# snapshot.element[].definition
The individual, organization or device that initiated the request and has responsibility for its activation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
onBehalfOf can only be specified if agent is practitioner or device

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The healthcare professional responsible for authorizing the initial prescription.

# snapshot.element[].comment
It is expected that the type of requester will be restricted for different stages of a MedicationRequest.  For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device.  Plans can be created by Practitioners, Patients, RelatedPersons and Devices.  Original orders can be created by a Practitioner only.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
Message/Body/NewRx/Prescriber  (need detail to link to specific prescriber … Prescriber.Identification in SCRIPT)

# snapshot.element[].mapping[].map
RXE-13-Ordering Provider's DEA Number / RXO-14-Ordering Provider's DEA Number / RXE-14-Pharmacist/Treatment Supplier's Verifier ID / RXO-15-Pharmacist/Treatment Supplier's Verifier ID / ORC-12-Ordering Provider / PRT-5-Participation Person: PRT-4-Participation='OP' (all but last deprecated)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The organization the device or practitioner was acting on behalf of.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when authoring the request.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Reason or indication for writing the prescription

# snapshot.element[].definition
The reason or the indication for ordering the medication.

# snapshot.element[].comment
This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept indicating why the medication was ordered.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].short
Condition or Observation that supports why the prescription is being written

# snapshot.element[].definition
Condition or observation that supports why the medication was ordered.

# snapshot.element[].comment
This is a reference to a condition or observation that is the reason for the medication order.  If only a code exists, use reasonCode.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Extra information about the prescription that could not be conveyed by the other attributes.

# snapshot.element[].comment
For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time.  This element may need to be included in narrative because of the potential for modifying information.  *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Individual responsible for the annotation

# snapshot.element[].definition
The individual responsible for making the annotation.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
Indicates when this particular annotation was made.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Indicates how the medication is to be used by the patient.

# snapshot.element[].comment
There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose.  For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting".  In these cases, two medication requests would be created that could be grouped together.  The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
Indicates the order in which the dosage instructions should be applied or interpreted.

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].requirements
If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent.  If the sequence number is different, then the Dosages are intended to be sequential.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Free text dosage instructions can be used for cases where the instructions are too complex to code.  The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated.  If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Supplemental instruction - e.g. "with meals"

# snapshot.element[].definition
Supplemental instruction - e.g. "with meals".

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].requirements
Additional instruction such as "Swallow with plenty of water" which may or may not be coded.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].short
Patient or consumer oriented instructions

# snapshot.element[].definition
Instructions in terms that are understood by the patient or consumer.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
This attribute may not always be populated while the Dosage.text is expected to be populated.  If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

# snapshot.element[].requirements
The timing schedule for giving the medication to the patient. The Schedule data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013".  Sometimes, a rate can imply duration when expressed as total volume / duration (e.g.  500mL/2 hours implies a duration of 2 hours).  However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
Identifies specific times when the event occurs.

# snapshot.element[].requirements
In an MAR, for instance, you need to take a general specification, and turn it into a precise specification.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A set of rules that describe when the event is scheduled.

# snapshot.element[].requirements
Many timing schedules are determined by regular repetitions.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If there's an offset, there must be a when (and not C, CM, CD, CV)

# snapshot.element[].constraint[].expression
offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))

# snapshot.element[].constraint[].xpath
f:period/@value >= 0 or not(f:period/@value)

# snapshot.element[].constraint[].human
If there's a periodMax, there must be a period

# snapshot.element[].constraint[].human
If there's a durationMax, there must be a duration

# snapshot.element[].constraint[].human
If there's a countMax, there must be a count

# snapshot.element[].constraint[].human
if there's a duration, there needs to be duration units

# snapshot.element[].constraint[].human
If there's a timeOfDay, there cannot be be a when, or vice versa

# snapshot.element[].constraint[].human
if there's a period, there needs to be period units

# snapshot.element[].constraint[].xpath
f:duration/@value >= 0 or not(f:duration/@value)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
The period during which the medication course should be taken

# snapshot.element[].definition
Outer bounds for start and/or end limits of the timing schedule.

# snapshot.element[].comment
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].constraint[].human
There SHALL be a code if there is a value and it SHALL be an expression of time.  If system is present, it SHALL be UCUM.

# snapshot.element[].constraint[].expression
code.exists() implies ((system = %ucum) and value.exists())

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
A total count of the desired number of repetitions.

# snapshot.element[].comment
If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.

# snapshot.element[].requirements
Repetitions may be limited by end time or total occurrences.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A maximum value for the count of the desired repetitions (e.g. do something 6-8 times).

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
How long this thing happens for when it happens.

# snapshot.element[].comment
For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

# snapshot.element[].requirements
Some activities are not instantaneous and need to be maintained for a period of time.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The upper limit of how long this thing happens for when it happens.

# snapshot.element[].comment
For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

# snapshot.element[].requirements
Some activities are not instantaneous and need to be maintained for a period of time.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
s | min | h | d | wk | mo | a - unit of time (UCUM)

# snapshot.element[].definition
The units of time for the duration, in UCUM units.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The number of times to repeat the action within the specified period / period range (i.e. both period and periodMax provided).

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Event occurs up to frequencyMax times per period

# snapshot.element[].definition
If present, indicates that the frequency is a range - so to repeat between [frequency] and [frequencyMax] times within the period or period range.

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period.

# snapshot.element[].comment
Do not use a IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
If present, indicates that the period is a range from [period] to [periodMax], allowing expressing concepts such as "do this once every 3-5 days.

# snapshot.element[].comment
Do not use a IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
s | min | h | d | wk | mo | a - unit of time (UCUM)

# snapshot.element[].definition
The units of time for the period in UCUM units.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
If one or more days of week is provided, then the action happens only on the specified day(s).

# snapshot.element[].comment
If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Specified time of day for action to take place.

# snapshot.element[].comment
When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Regular life events the event is tied to

# snapshot.element[].definition
Real world events that the occurrence of the event should be tied to.

# snapshot.element[].comment
When more than one event is listed, the event is tied to the union of the specified events.

# snapshot.element[].requirements
Timings are frequently determined by occurrences such as waking, eating and sleep.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Real world event relating to the schedule.

# snapshot.element[].definition
The number of minutes from the event. If the event code does not indicate whether the minutes is before or after the event, then the offset is assumed to be after the event.

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
BID | TID | QID | AM | PM | QD | QOD | Q4H | Q6H +

# snapshot.element[].definition
A code for the timing schedule. Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).

# snapshot.element[].comment
BID etc are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm".  If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or the a structured representation should be used (in this case, specifying the two event times).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Code for a known / defined timing pattern.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].short
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# snapshot.element[].definition
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# snapshot.element[].comment
Can express "as needed" without a reason by setting the Boolean = True.  In this case the CodeableConcept is not populated.  Or you can express "as needed" with a reason by including the CodeableConcept.  In this case the Boolean is assumed to be True.  If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed".

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].comment
If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension [body-site-instance](extension-body-site-instance.html).  May be a summary code, or a reference to a very precise definition of the location, or both.

# snapshot.element[].requirements
A coded specification of the anatomic site where the medication first enters the body.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept describing the site location the medicine enters into or onto the body.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].requirements
A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A code from the SNOMED Clinical Terminology UK coding system that describes the e-Prescribing route of administration

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].comment
Terminologies used often pre-coordinate this term with the route and or form of administration.

# snapshot.element[].requirements
A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections.  For examples, Slow Push; Deep IV.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept describing the technique by which the medicine is administered.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].comment
Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

# snapshot.element[].requirements
The amount of therapeutic or other substance given at one administration event.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, low SHALL have a lower value than high

# snapshot.element[].constraint[].expression
low.empty() or high.empty() or (low <= high)

# snapshot.element[].mapping[].map
NR and also possibly SN (but see also quantity)

# snapshot.element[].short
Upper limit on medication per unit of time

# snapshot.element[].definition
Upper limit on medication per unit of time.

# snapshot.element[].comment
This is intended for use as an adjunct to the dosage when there is an upper cap.  For example "2 tablets every 4 hours to a maximum of 8/day".

# snapshot.element[].requirements
The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time.  For example, 1000mg in 24 hours.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present

# snapshot.element[].constraint[].xpath
(count(f:numerator) = count(f:denominator)) and ((count(f:numerator) > 0) or (count(f:extension) > 0))

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].comment
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].definition
How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].definition
How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Upper limit on medication per administration

# snapshot.element[].definition
Upper limit on medication per administration.

# snapshot.element[].comment
This is intended for use as an adjunct to the dosage when there is an upper cap.  For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.

# snapshot.element[].requirements
The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].constraint[].human
The comparator is not used on a SimpleQuantity

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Upper limit on medication per lifetime of the patient

# snapshot.element[].definition
Upper limit on medication per lifetime of the patient.

# snapshot.element[].comment
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

# snapshot.element[].requirements
The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].constraint[].human
The comparator is not used on a SimpleQuantity

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

# snapshot.element[].requirements
Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr.  May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours.   Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours.  Sometimes, a rate can imply duration when expressed as total volume / duration (e.g.  500mL/2 hours implies a duration of 2 hours).  However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present

# snapshot.element[].constraint[].xpath
(count(f:numerator) = count(f:denominator)) and ((count(f:numerator) > 0) or (count(f:extension) > 0))

# snapshot.element[].definition
Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order).  Note that this information is not always sent with the order.  There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
This indicates the validity period of a prescription (stale dating the Prescription).

# snapshot.element[].comment
It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

# snapshot.element[].requirements
Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
An integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does not include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets.

# snapshot.element[].comment
If displaying "number of authorized fills", add 1 to this number.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Amount of medication to supply per dispense

# snapshot.element[].definition
The amount that is to be dispensed for one fill.

# snapshot.element[].comment
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].constraint[].human
The comparator is not used on a SimpleQuantity

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].mapping[].map
RXD-4-Actual Dispense Amount / RXD-5.1-Actual Dispense Units.code / RXD-5.3-Actual Dispense Units.name of coding system

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last.

# snapshot.element[].comment
In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage) When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If a code for the unit is present, the system SHALL also be present

# snapshot.element[].constraint[].human
There SHALL be a code if there is a value and it SHALL be an expression of time.  If system is present, it SHALL be UCUM.

# snapshot.element[].constraint[].expression
code.exists() implies ((system = %ucum) and value.exists())

# snapshot.element[].mapping[].map
PQ, IVL<PQ>, MO, CO, depending on the values

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Numerical value (with implicit precision)

# snapshot.element[].definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.

# snapshot.element[].comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

# snapshot.element[].requirements
Precision is handled implicitly in almost all cases of measurement.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value

# snapshot.element[].short
< | <= | >= | > - how to understand the value

# snapshot.element[].definition
How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

# snapshot.element[].comment
This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value.

# snapshot.element[].requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

# snapshot.element[].meaningWhenMissing
If there is no comparator, then there is no modification of the value

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
How the Quantity should be understood and represented.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The identification of the system that provides the coded form of the unit.

# snapshot.element[].requirements
Need to know the system that defines the coded form of the unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A computer processable form of the unit in some unit representation system.

# snapshot.element[].comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency.  The context of use may additionally require a code from a particular system.

# snapshot.element[].requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Indicates the intended dispensing Organization specified by the prescriber.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Any restrictions on medication substitution

# snapshot.element[].definition
Indicates whether or not substitution can or should be part of the dispense. In some cases substitution must happen, in other cases substitution must not happen. This block explains the prescriber's intent. If nothing is specified substitution may be done.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
True if the prescriber allows a different drug to be dispensed from what was prescribed.

# snapshot.element[].comment
This element is labeled as a modifer because whether substitution is allow or not cannot be ignored.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Indicates the reason for the substitution, or why substitution must or must not be performed.

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].short
An order/prescription that is being replaced

# snapshot.element[].definition
A link to a resource representing an earlier order related order or prescription.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Indicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. Drug-drug interaction, duplicate therapy, dosage alert etc.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
A list of events of interest in the lifecycle

# snapshot.element[].definition
Links to Provenance records for past versions of this resource or fulfilling request or event resources that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the resource.

# snapshot.element[].comment
This may not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# differential.element[].short
The period during which the medication course should be taken

# differential.element[].definition
Outer bounds for start and/or end limits of the timing schedule.

# differential.element[].short
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# differential.element[].definition
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# differential.element[].binding.description
Indicates the precondition for taking the Medication, i.e. the dose direction duration

# differential.element[].binding.description
A code from the SNOMED Clinical Terminology UK coding system that describes the e-Prescribing route of administration