# description
This QuestionnaireResponse resource is constrained to represent the responses given to an Educational History questionnaire, to support the Digital Child Health project.

# snapshot.element[].short
A structured set of questions and their answers

# snapshot.element[].definition
A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.

# snapshot.element[].comment
The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on.  I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain nested Resources

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain any narrative

# snapshot.element[].constraint[].human
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource

# snapshot.element[].definition
The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

# snapshot.element[].comment
The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
A set of rules under which this content was created

# snapshot.element[].definition
A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

# snapshot.element[].comment
Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.   This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The base language in which the resource is written.

# snapshot.element[].comment
Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource  Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Text summary of the resource, for human interpretation

# snapshot.element[].definition
A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

# snapshot.element[].comment
Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

# snapshot.element[].comment
This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A business identifier assigned to a particular completed (or partially completed) questionnaire.

# snapshot.element[].requirements
Used for tracking, registration and other business purposes.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
usual | official | temp | secondary (If known)

# snapshot.element[].comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

# snapshot.element[].requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the purpose for this identifier, if known .

# snapshot.element[].definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].comment
This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

# snapshot.element[].requirements
Allows users to make use of identifiers when the identifier system is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

# snapshot.element[].requirements
There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

# snapshot.element[].example[].valueUri
http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.

# snapshot.element[].comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)

# snapshot.element[].short
Time period when id is/was valid for use

# snapshot.element[].definition
Time period during which identifier is/was valid for use.

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].mapping[].map
Role.effectiveTime or implied by context

# snapshot.element[].short
Organization that issued id (may be just text)

# snapshot.element[].definition
Organization that issued/manages the identifier.

# snapshot.element[].comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper

# snapshot.element[].short
Request fulfilled by this QuestionnaireResponse

# snapshot.element[].definition
The order, proposal or plan that is fulfilled in whole or in part by this QuestionnaireResponse.  For example, a ProcedureRequest seeking an intake assessment or a decision support recommendation to assess for post-partum depression.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Supports traceability of responsibility for the action and allows linkage of an action to the recommendations acted upon.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
A procedure or observation that this questionnaire was performed as part of the execution of.  For example, the surgery a checklist was executed as part of.

# snapshot.element[].comment
Composition of questionnaire responses will be handled by the parent questionnaire having answers that reference the child questionnaire.  For relationships to referrals, and other types of requests, use basedOn.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The Questionnaire that defines and organizes the questions for which answers are being provided.

# snapshot.element[].comment
If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).

# snapshot.element[].requirements
Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].short
in-progress | completed | amended | entered-in-error | stopped

# snapshot.element[].definition
The position of the questionnaire response within its overall lifecycle.

# snapshot.element[].comment
This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

# snapshot.element[].requirements
The information on Questionnaire resources  may possibly be gathered during multiple sessions and altered after considered being finished.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Lifecycle status of the questionnaire response.

# snapshot.element[].mapping[].map
.statusCode (also whether there's a revisionControlAct - and possibly mood to distinguish "in-progress" from "published)

# snapshot.element[].short
The subject of the Educational History questions

# snapshot.element[].definition
The subject of the questionnaire response.  This could be a patient, organization, practitioner, device, etc.  This is who/what the answers apply to, but is not necessarily the source of information.

# snapshot.element[].comment
If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.

# snapshot.element[].requirements
Allows linking the answers to the individual the answers describe.  May also affect access control.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Encounter or Episode during which questionnaire was completed

# snapshot.element[].definition
The encounter or episode of care with primary association to the questionnaire response.

# snapshot.element[].comment
A questionnaire that was initiated during an encounter but not fully completed during the encounter would still generally be associated with the encounter.

# snapshot.element[].requirements
Provides context for the information that was captured.  May also affect access control.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The date and/or time that this set of answers were last changed.

# snapshot.element[].comment
May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.  This element is optional to allow for systems that may not know the value, however it SHOULD be populated if possible.

# snapshot.element[].requirements
Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Person who received and recorded the answers

# snapshot.element[].definition
Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.

# snapshot.element[].comment
Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation.  Authoring by device would indicate that some portion of the questionnaire had been auto-populated.

# snapshot.element[].requirements
Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The person who answered the questions about the subject.

# snapshot.element[].comment
If not specified, no inference can be made about who provided the data.

# snapshot.element[].requirements
When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Code indicating the response provided for a question.

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Code indicating the response provided for a question.

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].short
The Year the child attended the school from

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Code indicating the response provided for a question.

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Code indicating the response provided for a question.

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].short
The outcome of an educational assessment

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
The outcome of an educational assessment

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# snapshot.element[].short
The type of special educational need that the child has

# snapshot.element[].definition
A group or question item from the original questionnaire for which answers are provided.

# snapshot.element[].comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Nested item can't be beneath both item and answer

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Pointer to specific item from Questionnaire

# snapshot.element[].definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
ElementDefinition - details for the item

# snapshot.element[].definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.

# snapshot.element[].comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].  There is no need for this element if the item pointed to by the linkId has a definition listed.

# snapshot.element[].requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Text that is displayed above the contents of the group or as the text of the question being answered.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Allows the questionnaire response to be read without access to the questionnaire.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The subject this group's answers are about

# snapshot.element[].definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
The respondent's answer(s) to the question.

# snapshot.element[].comment
The value is nested because we cannot have a repeating structure that has variable type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The answer (or one of the answers) provided by the respondent to the question.

# snapshot.element[].comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type.  Additional complex types can be introduced through extensions.

# snapshot.element[].requirements
Ability to retain a single-valued answer to a question.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].definition
Nested groups and/or questions found within this particular answer.

# snapshot.element[].requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

# snapshot.element[].definition
Questions or sub-groups nested beneath a question or group.

# snapshot.element[].requirements
Reports can consist of complex nested groups.

# differential.element[].short
The subject of the Educational History questions

# differential.element[].short
The Year the child attended the school from

# differential.element[].short
The outcome of an educational assessment

# differential.element[].binding.description
The outcome of an educational assessment

# differential.element[].short
The type of special educational need that the child has