# description
This Task resource has been constrained to represent a nullification request for a Failsafe Alert event message, to support the Events Management Service project.

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain nested Resources

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL NOT contain any narrative

# snapshot.element[].constraint[].human
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated

# snapshot.element[].constraint[].human
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource

# snapshot.element[].constraint[].human
Last modified date must be greater than or equal to authored-on date.

# snapshot.element[].definition
The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

# snapshot.element[].comment
The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
A set of rules under which this content was created

# snapshot.element[].definition
A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

# snapshot.element[].comment
Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.   This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The base language in which the resource is written.

# snapshot.element[].comment
Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource  Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Text summary of the resource, for human interpretation

# snapshot.element[].definition
A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

# snapshot.element[].comment
Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

# snapshot.element[].comment
This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
usual | official | temp | secondary (If known)

# snapshot.element[].comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

# snapshot.element[].requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the purpose for this identifier, if known .

# snapshot.element[].definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].comment
This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

# snapshot.element[].requirements
Allows users to make use of identifiers when the identifier system is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

# snapshot.element[].requirements
There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

# snapshot.element[].example[].valueUri
http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.

# snapshot.element[].comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)

# snapshot.element[].short
Time period when id is/was valid for use

# snapshot.element[].definition
Time period during which identifier is/was valid for use.

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].mapping[].map
Role.effectiveTime or implied by context

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Organization that issued id (may be just text)

# snapshot.element[].definition
Organization that issued/manages the identifier.

# snapshot.element[].comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A reference to a formal or informal definition of the task.  For example, a protocol, a step within a defined workflow definition, etc.

# snapshot.element[].requirements
Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation) to be associated with a task, enabling automation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
BasedOn refers to a higher-level authorization that triggered the creation of the task.  It references a "request" resource such as a ProcedureRequest, MedicationRequest, ProcedureRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfil.  This latter resource is referenced by FocusOn.  For example, based on a ProcedureRequest (= BasedOn), a task is created to fulfil a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
An identifier that links together multiple tasks and other requests that were created in the same context.

# snapshot.element[].requirements
Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
usual | official | temp | secondary (If known)

# snapshot.element[].comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

# snapshot.element[].requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Identifies the purpose for this identifier, if known .

# snapshot.element[].definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].comment
This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

# snapshot.element[].requirements
Allows users to make use of identifiers when the identifier system is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

# snapshot.element[].requirements
There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

# snapshot.element[].example[].valueUri
http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.

# snapshot.element[].comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)

# snapshot.element[].short
Time period when id is/was valid for use

# snapshot.element[].definition
Time period during which identifier is/was valid for use.

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].mapping[].map
Role.effectiveTime or implied by context

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Organization that issued id (may be just text)

# snapshot.element[].definition
Organization that issued/manages the identifier.

# snapshot.element[].comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].mapping[].map
II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Task that this particular task is part of.

# snapshot.element[].requirements
Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
draft | requested | received | accepted | +

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
An explanation as to why this task is held, failed, was refused, etc.

# snapshot.element[].comment
This applies to the current status.  Look at the history of the task to see reasons for past statuses.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Codes to identify the reason for current status.  These will typically be specific to a particular workflow.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Contains business-specific nuances of the business state.

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].requirements
There's often a need to track substates of a task - this is often variable by specific workflow implementation.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
The domain-specific business-contextual sub-state of the task.  For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Indicates the "level" of actionability associated with the Task.  I.e. Is this a proposed task, a planned task, an actionable task, etc.

# snapshot.element[].comment
This element is immutable.  Proposed tasks, planned tasks, etc. must be distinct instances.  In most cases, Tasks will have an intent of "order".

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Distinguishes whether the task is a proposal, plan or full order

# snapshot.element[].definition
Indicates how quickly the Task should be addressed with respect to other requests.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Used to identify the service level expected while performing a task.

# snapshot.element[].meaningWhenMissing
If missing, this task should be performed with normal priority

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A name or code (or both) briefly describing what the task involves.

# snapshot.element[].comment
The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Codes to identify what the task involves.  These will typically be specific to a particular workflow.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].short
Description of why an alert has been nullified

# snapshot.element[].definition
A free-text description of what is to be performed.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].example[].valueString
Severity Level: Warning Alert - Escalation Level: Service - Condition ID: 001 - Condition Description: Missing Health Visiting Service - Reason for alert: Individual has a missing association with a Health Visiting Service - Service needed to action: Health Visiting

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Originating Failsafe Alert responsible for the nullification request

# snapshot.element[].definition
The request being actioned or the resource being manipulated by this task.

# snapshot.element[].comment
If multiple resources need to be manipulated, use sub-tasks.  (This ensures that status can be tracked independently for each referenced resource.).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The entity who benefits from the performance of the service specified in the task (e.g., the patient).

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Used to track tasks outstanding for a beneficiary.  Do not use to track the task owner or creator (see owner and creator respectively).  This can also affect access control.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Healthcare event during which this task originated

# snapshot.element[].definition
The healthcare event  (e.g. a patient and healthcare provider interaction) during which this task was created.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
For some tasks it may be important to know the link between the task or episode of care the task originated within.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

# snapshot.element[].comment
This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The date and time the nullification was raised

# snapshot.element[].definition
The date and time the nullification was raised

# snapshot.element[].requirements
Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The date and time of last modification to this task.

# snapshot.element[].requirements
Used along with history to track task activity and time in a particular task state.  This enables monitoring and management.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Requester of the nullification of Failsafe Alert

# snapshot.element[].requirements
Identifies who created this task.  May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The device, practitioner, etc. who initiated the task.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The organization the device or practitioner was acting on behalf of when they initiated the task.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].requirements
Practitioners and Devices can be associated with multiple organizations.  This element indicates which organization they were acting on behalf of when authoring the request.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
The service to action the task for the Failsafe Alert

# snapshot.element[].definition
The type of participant that can execute the task.

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].requirements
Use to distinguish tasks on different activity queues.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Individual organization or Device currently responsible for task execution.

# snapshot.element[].comment
Tasks may be created with an owner not yet identified.

# snapshot.element[].requirements
Identifies who is expected to perform this task.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Reason for the nullification of the Failsafe Alert

# snapshot.element[].definition
A description or code indicating why this task needs to be performed.

# snapshot.element[].comment
This should only be included if there is no focus or if it differs from the reason indicated on the focus.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
The reason for the nullification of the Failsafe Alert

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].example[].valueString
Agreement in place that service is to be provided by a different organisation

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
Free-text information captured about the task as it progresses.

# snapshot.element[].comment
For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time.  This element may need to be included in narrative because of the potential for modifying information.  *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Individual responsible for the annotation

# snapshot.element[].definition
The individual responsible for making the annotation.

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
Indicates when this particular annotation was made.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

# snapshot.element[].comment
This element does not point to the Provenance associated with the *current* version of the resource - as it would be created after this version existed.  The Provenance for the current version can be retrieved with a _revinclude.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Period of time during which nullification of the Failsafe Alert applies

# snapshot.element[].definition
If the Task.focus is a request resource and the task is seeking fulfillment (i.e is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.

# snapshot.element[].requirements
Sometimes when fulfillment is sought, you don't want full fulfillment.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
Instead of pointing to request, would point to component of request, having these characteristics

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
Indicates the number of times the requested action should occur.

# snapshot.element[].comment
32 bit number; for values larger than this, use decimal

# snapshot.element[].requirements
E.g. order that requests monthly lab tests, fulfillment is sought for 1.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Over what time-period is fulfillment sought.

# snapshot.element[].comment
Note that period.high is the due date representing the time by which the task should be completed.

# snapshot.element[].requirements
E.g. order that authorizes 1 year's services.  Fulfillment is sought for next 3 months.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
If present, start SHALL have a lower value than end

# snapshot.element[].constraint[].expression
start.empty() or end.empty() or (start <= end)

# snapshot.element[].mapping[].map
IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The start of the period. The boundary is inclusive.

# snapshot.element[].comment
If the low element is missing, the meaning is that the low boundary is not known.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
End time with inclusive boundary, if not ongoing

# snapshot.element[].definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

# snapshot.element[].comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.

# snapshot.element[].meaningWhenMissing
If the end of the period is missing, it means that the period is ongoing

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

# snapshot.element[].comment
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
SHALL have a contained resource if a local reference is provided

# snapshot.element[].mapping[].map
The target of a resource reference is a RIM entry point (Act, Role, or Entity)

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].short
Literal reference, Relative, internal or absolute URL

# snapshot.element[].definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

# snapshot.element[].comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].short
Logical reference, when literal reference is not known

# snapshot.element[].definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

# snapshot.element[].comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.   When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CX / EI (occasionally, more often EI maps to a resource id or a URL)

# snapshot.element[].mapping[].map
II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]

# snapshot.element[].definition
Plain text narrative that identifies the resource in addition to the resource reference.

# snapshot.element[].comment
This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
Additional information that may be needed in the execution of the task.

# snapshot.element[].requirements
Resources and data used to perform the task.  This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A code or description indicating how the input is intended to be used as part of the task execution.

# snapshot.element[].comment
If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

# snapshot.element[].requirements
Inputs are named to enable task automation to bind data and pass it from one task to the next.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Codes to identify types of input parameters.  These will typically be specific to a particular workflow.  E.g. "Comparison source", "Applicable consent", "Concommitent Medications", etc.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
The value of the input parameter as a basic type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].requirements
Resources and data produced during the execution the task.  This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].comment
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

# snapshot.element[].requirements
Outputs are named to enable task automation to bind data and pass it from one task to the next.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].binding.description
Codes to identify types of input parameters.  These will typically be specific to a particular workflow.  E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
A reference to a code defined by a terminology system.

# snapshot.element[].comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

# snapshot.element[].requirements
Allows for translations and alternate encodings within a code system.  Also supports communication of the same instance to systems requiring different encodings.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
CE/CNE/CWE subset one of the sets of component 1-3 or 4-6

# snapshot.element[].definition
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].slicing.description
Extensions are always sliced by (at least) url

# snapshot.element[].short
Additional Content defined by implementations

# snapshot.element[].definition
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

# snapshot.element[].comment
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].constraint[].human
Must have either extensions or value[x], not both

# snapshot.element[].definition
The identification of the code system that defines the meaning of the symbol in the code.

# snapshot.element[].comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

# snapshot.element[].requirements
Need to be unambiguous about the source of the definition of the symbol.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

# snapshot.element[].comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to refer to a particular code in the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].definition
A representation of the meaning of the code in the system, following the rules of the system.

# snapshot.element[].comment
Note that FHIR strings may not exceed 1MB in size

# snapshot.element[].requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know  the system.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.2 - but note this is not well followed

# snapshot.element[].short
If this coding was chosen directly by the user

# snapshot.element[].definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

# snapshot.element[].comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

# snapshot.element[].requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source "true";     fhir:target dt:CDCoding.codingRationale\#O   ]

# snapshot.element[].short
Plain text representation of the concept

# snapshot.element[].definition
A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

# snapshot.element[].comment
Very often the text is the same as a displayName of one of the codings.

# snapshot.element[].requirements
The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# snapshot.element[].mapping[].map
C*E.9. But note many systems use C*E.2 for this

# snapshot.element[].definition
The value of the Output parameter as a basic type.

# snapshot.element[].constraint[].human
All FHIR elements must have a @value or children

# snapshot.element[].constraint[].expression
hasValue() | (children().count() > id.count())

# differential.element[].short
Description of why an alert has been nullified

# differential.element[].example[].valueString
Severity Level: Warning Alert - Escalation Level: Service - Condition ID: 001 - Condition Description: Missing Health Visiting Service - Reason for alert: Individual has a missing association with a Health Visiting Service - Service needed to action: Health Visiting

# differential.element[].short
Originating Failsafe Alert responsible for the nullification request

# differential.element[].short
The date and time the nullification was raised

# differential.element[].definition
The date and time the nullification was raised

# differential.element[].short
Requester of the nullification of Failsafe Alert

# differential.element[].short
The service to action the task for the Failsafe Alert

# differential.element[].short
Reason for the nullification of the Failsafe Alert

# differential.element[].binding.description
The reason for the nullification of the Failsafe Alert

# differential.element[].example[].valueString
Agreement in place that service is to be provided by a different organisation

# differential.element[].short
Period of time during which nullification of the Failsafe Alert applies